Adjustable PCB Stand

This is a custom built PCB stand designed to aid with soldering and tinkering on PCBs.

The maximum width that this model can handle is 150mm. Simply assemble as described below and adjust side screws to whatever size you need.

Additional parts required for assembly:

9 x M4 threaded inserts
6 x M4x20mm
3 x M4x12mm
2 x 14mm diameter bearings (5mm bore, 5mm depth)

Optional but recommended:
2 x M4 Nuts
Quantity of each file required to print:

1 x Stand_Frame
1 x Leg_Screw_Base
1 x Leg_Screw
1 x Rotator
1 x Leg_Nut
2 x Screw
3 x Clamp_End
4 x TPU_Foot
Part specific print instructions (0.2mm layer height recommended for all, PLA or PETG):

Stand_Frame: >25% infill (higher infill increases strength), only tops of large side threads require supports

TPU_Foot: print in TPU to increase friction and reduce sliding

Other models: no specific requirements

Assembly

1 - Print files off as stated previously

2 - Place threaded inserts into all 4 TPU feet and screw M4x20mm bolt into the 4 res