Adjustable Z-Probe Mount

This is an adjustable and modular z-probe, originally designed to use the Makerbot Microswitches on a delta printer, however using 3.02 for the lower part should allow the use of other switches. The Makerbot Microswitch boards do not fit in the conventional Z-Probe position on Delta printers because the board size interferes with the arms. This design allows a bottom mounted switch which is triggered via a lever. The modular design allows replacing individual elements to fit your printer.

You will need:

* 9 M3 Socketed screws varying lengths
* 9 M3 Nuts
* Long #2 or #1.5 Allen Wrench
* Spring

### The Mount

**Base** (*z-ProbeMount.1.00.Base.stl*) - The base which acts as a mount to the effector. Since screw hole placement can vary depending on your effector, this part was designed separately so that it can be replaced without having to change the rest of the system.

**Top** (* z-ProbeMount.1.00 Top.stl*) - The Top mount allows sliding the probe further away from the