Thingiverse
Adventskranz
par Smokyjoe
133
Téléchargements
105
Likes
0
Makes
An Advent wreath with illuminated firs.
The lights are controlled via an Arduino.
_________________________________
3D Print Parts:
Main Body 1x
Bottom 1x
Bottom small 1x
Fir Tree 4x (print without bottom / no infill)
Deer 1x
Deer plate 1x
Pot top part 1x
Pot shell 1x
Button mini plate 1x
Circuit board holder 1x
StepUp holder 1x
Tp4056 holder 1x
Electronic components:
TP4056 charging module 1x
MT3608 step up converter 1x
Pot 10k 1x
Micro button (6x6x5mm) 1x
Neopixel (Strip) 4x
Mini switch (SS12F15) 1x
Capacitor (220μF) 1x
Resistor 470ohm 1x
Resistor 10k ohm 1x
Arduino mini 1x
Circuit board (39x23,5mm) 1x
Male and female header (if the microcontroller should be pluggable)
18650 battery 1x
______________________________________________________
Look at the video and the PDF file.
If you print it, please post your Makes.
Look at my other things :)
Happy Printing ;)
The lights are controlled via an Arduino.
_________________________________
3D Print Parts:
Main Body 1x
Bottom 1x
Bottom small 1x
Fir Tree 4x (print without bottom / no infill)
Deer 1x
Deer plate 1x
Pot top part 1x
Pot shell 1x
Button mini plate 1x
Circuit board holder 1x
StepUp holder 1x
Tp4056 holder 1x
Electronic components:
TP4056 charging module 1x
MT3608 step up converter 1x
Pot 10k 1x
Micro button (6x6x5mm) 1x
Neopixel (Strip) 4x
Mini switch (SS12F15) 1x
Capacitor (220μF) 1x
Resistor 470ohm 1x
Resistor 10k ohm 1x
Arduino mini 1x
Circuit board (39x23,5mm) 1x
Male and female header (if the microcontroller should be pluggable)
18650 battery 1x
______________________________________________________
Look at the video and the PDF file.
If you print it, please post your Makes.
Look at my other things :)
Happy Printing ;)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
