AE86 Sunset HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Prusament Galaxy Purple Transmission Distance: 4.7PLA Prusament Lipstick Red Transmission Distance: 3.3PLA PolyTerra Sunrise Orange Transmission Distance: 2PLA Prusament Ms. Pink Transmission Distance: 4.1PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #5 (0.52mm) swap to Galaxy PurpleAt layer #9 (0.84mm) swap to Lipstick RedAt layer #13 (1.16mm) swap to Sunrise OrangeAt layer #16 (1.4mm) swap to Ms. PinkAt layer #23 (1.96mm) swap to Jade White for the rest.