Aelishyia

by 冷鸢-浮雕照片制作

7 Downloads

4 Likes

0 Makes

Download Model

Honkai Aelishyia hueforge Honkai Impact 3rd

爱丽希雅多色浮雕照片打印设置：使用100%填充，0.08层高，0.16首层打印开始打印使用黑色在#7 (0.64mm) 切换成梅红在 #13 (1.12mm)切换成淡粉在 #17 (1.44mm)切换成白色材料（PLA/PETG）二者即可PETG JAYO Black Transmission Distance: 0.3PETG PolyLite Plum red Transmission Distance: 5PETG Kexcelled Pale pink Transmission Distance: 5PETG JAYO White Transmission Distance: 6不同的耗材会引入色差 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm