Aeon Pro Carbine Kit

This is a pump-action collapsible stock carbine kit for the Adventure Force Aeon Pro. The pump grip part of the kit requires no internal modification to the blaster at all- just needs the slide removed to fit, and then two 1/8 inch thick aluminum bars cut to length and drilled appropriately to serve as prime bars. The collapsible stock part of the kit will require the blaster to actually be opened, but only needs two holes drilled in the rear to attach the mechanism. Otherwise, there is no actual internal modification necessary.

You will need:

A variety of 6-32 screws, ranging from 1/2" to 1", as well as hex nuts to match. I just went to Ace and bought a bagful. For the pump grip, four 3/4" with hex nuts, for the pump slide two 3/4" and two 1/2" (3/8" also works, may be necessary depending on your aluminum bars; washers might be a good idea too) and for the pump rails four 3/4". For the stock mechanism, you'll need six 1/2" and two hex nuts.

Two to three springs for the stock