Aerobee Model rocket

The rocket was originally designed By John Coker in his YouTube video

https://www.youtube.com/watch?v=x2fTdN1RijQ.

http://jcrocket.com/mr-scratch-building.shtml (download for .pdf fin template)

however I wanted it to have the raised details on the side just like the real life rocket. the boat tail and .pdf plans for the fins are from John Coker. and the centering rings and the engine stop are from jgutz20 here on thingiverse. Lastly the nose cone is from JackHydrazine I have placed all the files here for ease of location.


To build this rocket you will need some 1/16th or 3/32nd thick balsa sheet to cut the fins
https://www.apogeerockets.com/Building_Supplies/Balsa/Balsa_Sheet_1_16in_x_18in

a 10 and 1/8 inch length section of Estes bt-50 body tube
https://www.apogeerockets.com/Building_Supplies/Body_Tubes/Low_Power_Tubes/24mm_x_18_Body_Tube_Estes_BT-50_size

a 3 or so inch section of Estes bt-20 body tube https://www.apogeerockets.com/Building_Supplies/Body