Aerotrooper Hatch Seal

TPU 90A — Soft Seal Profile Temperatures:Nozzle temperature: 225 °CBed temperature: 40 °C SpeedsOuter wall speed: 12 mm/sInner wall speed: 15 mm/sInfill speed: 21 mm/sInternal solid infill: 21 mm/sTop surface speed: 12 mm/sFirst layer speed: 15 mm/sTravel speed: 120 mm/sAcceleration (Process → Speed → Acceleration)Default acceleration: 2500 mm/s²Outer wall acceleration: 1500 mm/s²Inner wall acceleration: 2500 mm/s²Infill acceleration: 3000 mm/s²Top surface acceleration: 1500 mm/s²Initial layer acceleration: 1200 mm/s²Travel acceleration: 3500 mm/s² RetractionRetraction distance: 0.6 mmRetraction speed: 20 mm/sDe-retracton speed: 0.6 mm/s CoolingPart cooling fan: 30%First layer fan: 0%Bridge fan speed: 60% Layer SettingsLayer height: 0.20 mmFirst layer height: 0.19 mmLine width: 0.42 mm Flow & PressureFlow ratio: 1.02Pressure advance (K): 0.02 AdhesionBuild plate: Textured PEI StructureWall loops: 3Top shell layers: 8Bottom shell layers: 8Infill pattern: GyroidInfill density: 0% Filamen