Air Brush Spray Booth

This spray booth uses a 150mm (6-inch) duct fan, available on Amazon.I used the following : Hon&Guan HI-150SD (Amazon JP)I used a product that was 147mm x 185mm.https://amzn.to/4ouu0Tyhttps://amzn.to/4nyznjCExternal dimensions : 406mm, Internal dimensions : 400mmUse a 10 x 2.5mm magnet.It depends on the price of PLA, but it should cost around $100 to make."Spray Booth assembled.step" is a STEP file of the assembled parts.Please use this as a reference if you are unsure of the shape of the finished product. Because we prioritized durability, it required a lot of material and took a very long time to print.I've placed all the minimum parts in the second profile.It looks like I'll be using 4.4kg for about 107 hours. The holes for each connection are 12mm.There is no clearance, so if they are loose, use glue.If they are narrow, print the "Panel" using XY correction.Attach three "Panels" to the "Rear Corner". Create four.Combine the four corners with