Air Compressor Hose Hook

A simple hanging hook to keep your air hose with your **portable air compressor**. Designed specifically for the *DeWalt* 26-gallon, 175PSI upright portable (wheeled) air compressor (DXCMSAC260) shown in these photos. **Print two** of these hooks; **mirror one** for a symmetrical look, as shown. I tried to keep this minimalistic, so it is secured to the compressor's mounting rack with zip ties through the provided slots, and rests on the crown of the tank for added hook support.

**Printing Suggestions**
This part needs to be strong, so the thicker you set your slicer's wall thickness, the better. I used 5 wall lines (2.5mm) with my 0.5mm nozzle, so adjust for your printer nozzle. I used 30% infill. Printing in the orientation provided in the .3MF and .STL files provides the best linear strength (minimal layer separation). No supports needed for most printers.

The hook as designed is intended for the right side. For the 2nd hook (left side), I just mirrored it on the print bed wi