Thingiverse
Air Quick-Connect x 1/2" NPT Thread
por 3DBender
152
Descargas
117
Likes
1
Makes
Adapts from Air Quick-Connect to 1/2" NPT male thread. Considered as a novelty item only!
Be aware that air compressors can produce high pressure and CAUTION should always be observed. This is obviously not an engineered adapter and will be considered "USE AT OWN RISK". I will not recommend or guarantee any pressure other than 0psi (zero).
Printed with Nylon at 100% infill. NO rafts or brims required. NO supports are required. Recommended orientation on the build plate is 1/2" NPT threads on the build plate while the Air Quick-Connector is at the top.
Be aware that air compressors can produce high pressure and CAUTION should always be observed. This is obviously not an engineered adapter and will be considered "USE AT OWN RISK". I will not recommend or guarantee any pressure other than 0psi (zero).
Printed with Nylon at 100% infill. NO rafts or brims required. NO supports are required. Recommended orientation on the build plate is 1/2" NPT threads on the build plate while the Air Quick-Connector is at the top.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
