AKAZA

Project: akaza.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 188x235mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.52mm and the Actual Thickness is 3.36mmFilaments Used: (* = Owned) #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ff8623 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #18 (1.52mm) swap to Blue Gray At layer #23 (1.92mm) swap to Red At layer #24 (2mm) swap to Cyan At layer #27 (2.24mm) swap to Pumpkin