Alien HueForge

Picture source - author: Brett Voutier @brettvoutierThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size model/profile, the first is 200x200 and the second for A1Mini 150x150. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.64mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. TIP : The print is perfect also in black and white (skip the orange). Or you can replace the orange with red is good too, And version wiht very light blue (ice blue) or ligh green looks great too. Perfect is with glow filaments, but here skip the white completely - the glow filam