Alien Ornate

The Model is 200x200mm in size. X and Y can be adjsuted but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA BambuLab Basic Gray Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #21 (1.76mm) swap to White for the rest. Alien Ornate 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gold Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Gray At layer #12 (1.04mm) swap to Jade White At layer #18 (1.52mm) swap to Gold for the rest.