Alien Romulus (Xenomorph) hueforge, only 2 colour

Project: alien romulus.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.86x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.9mm Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil rojo Transmission Distance: 2.3 This print uses 2 unique filaments Swap Instructions: Start with negro At layer #11 (0.96mm) swap to rojo for the rest.