Alien Romulus (Xenomorph) hueforge, only 2 colour

Project: alien romulus.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.86x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil rojo Transmission Distance: 2.3This print uses 2 unique filamentsSwap Instructions: Start with negro At layer #11 (0.96mm) swap to rojo for the rest.