Alien "Shhhh" Night Light

Another simple light that prints quickly with no supports and is a piece of cake to assemble with this rechargeable LED puck. https://amzn.eu/d/0gmpKMz3 The ones on Amazon come with 3 lights and one remote but you can buy the remotes really cheaply on AliExpress or you can use any similar LED puck that's 86mm in diameter. Just print the light with 3 walls and 100% infill. Align the slot to the back of the plate and align the seam to back for neatness. Once printed, just line the LED puck up with the cutout so that the switch and charging cable are accessible and push the puck in. I find it easiest to push it in slightly, then put the light the right way up on a flat surface and push down on the top. This ensures that the bottom of the puck is aligned nicely to the base of the light. It's a tight enough fit that it shouldn't move but if you want to be really safe, put a small amount of super glue around the inside of the printed part before you put the puck in. If you want t