Alien xenomorph - Giger- Hueforge

100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ eSun gray Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA+ esun White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to gray At layer #14 (1.2mm) swap to Bone White At layer #21 (1.76mm) swap to White for the rest. Clean the plate thoroughly before printing. Make sure the filament is dry and free from dirt. This can damage the print or weaken the supports.