All Gave Some

by Sauron_Gorthaur

20 Downloads

14 Likes

9 Makes

Download Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x76.78mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Protopasta Good as Gold Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start