Allsky Camera Build

Originally designed by das_shark

I saw a slight opportunity to improve some clearances and suspect that the recommended box had been changed since designed, so I added some additional reliefs on the bottom of the SBC plate. Ensure this is printed in something temperature resistant like ABS or ASA to prevent warping in the warmer seasons.

Changes Made:
- Shifted SBC mount by 2.4mm to provide better clearance for the USB3 cable
- Added recessions on the bottom of the SBC plate to better match the bottom of the recommended box
- Enlarged the bolt hole for the Camera mount to allow for a 1/4 diameter bolt (size of the threads on ZWO planetary cameras)
- Enlarged a stepped cutout around the bulkhead to provide better clearance when removing the internals so that bulkhead removal is not necessary

Products used in the build of this Allsky camera:

Camera: https://agenaastro.com/zwo-asi662mc-cmos-color-astronomy-imaging-camera.html
Enclosure: https://www.amazon.com/dp/B075DG2CN6
Dome: ht