Thingiverse
Alternative Mounting for Kinect2
por m-sriubiskis
9
Descargas
7
Likes
0
Makes
I needed to remove the microphone but still have a stable method for mounting the xbox kinect2 so I designed these two pieces to mount the device to an enclosure.
You can see how to take the device a part here:
https://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
If you want to have a different power supply you can see that here:
http://www.tatsch.it/kinect-2-usb-3-modification/
(WARNING: you can really screw up the kinect like this)
To mount it I used:
6-32 machine screws
6-32 hex nut
Number 6 washers
To assemble please refer to my pictures
Tips:
- The fit should be tight for the part you insert, if the print is quality it won't break when you tap it in with a hammer
- The hardest part is lining up the two mounts, once those are in place just slide the kinect in and screw in the front
- Be really careful when taking the kinect a part
NOTE: This is for educational purposes and I am not encouraging you to tamper with an Xbox Kinect. If you chose to
You can see how to take the device a part here:
https://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
If you want to have a different power supply you can see that here:
http://www.tatsch.it/kinect-2-usb-3-modification/
(WARNING: you can really screw up the kinect like this)
To mount it I used:
6-32 machine screws
6-32 hex nut
Number 6 washers
To assemble please refer to my pictures
Tips:
- The fit should be tight for the part you insert, if the print is quality it won't break when you tap it in with a hammer
- The hardest part is lining up the two mounts, once those are in place just slide the kinect in and screw in the front
- Be really careful when taking the kinect a part
NOTE: This is for educational purposes and I am not encouraging you to tamper with an Xbox Kinect. If you chose to
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
