Alveo filter case

This thing is a minimalistic case for Alveo's 3D printer filter. You can use the filter sold in the kit or every other 120mm you have on hands. I mounted it for a push&pull with 2 industrials fans.

These filters are designed to be efficient with a certain airflow. Basically the airflow of the stock fan. With differents ones, be sure to regulate your fan(s) to make most of the filter.
Note that most of PC fans would be quieter but can not push air through this thick filter.

You will need to print:
1x Filter-box.part-1.STL
1x Filter-box.part-oring.STL
8x Filter-box.lock.STL to close the two halves
1x or 2x Filter-box.seal.STL in **TPU** depending on the number of fans.

The seal between the two halves is a 3mm oring which is normally supplied in the AlveoONE kit.

Use M4 nuts and screws to install fan(s).