Ambient Lamp

Beautiful Ambient light for addressable LED strips and matrices based on ESP8266.


### 3D Printed Parts:

- Lamp Body
- Lamp Base
- Pipe Fitting
- Bottom Cover

### Lamp Body:

Make sure to scale the Lamp Body to 100x100: [Lamp Body Model](https://makerworld.com/en/models/13717)

### Additional Parts:

- Wemos D1 Mini (or other ESP8266 board)
- WS2812 LED Matrix 16x16 (Make sure it's 5V version, not 12)
- AC-DC Power Supply: 5V 5A (at least 3A)
- DC Power Supply Jack Socket (Female)
- Sensor Button Module (Optional)
- Water Pipe 50mm

### Building instructions:

1. Cut the pipe to fit the size of the LED matrix.
2. Make holes in the pipe to match the wire leads on the matrix.
3. Wrap the LED matrix around the pipe, threading the wires inside, and secure it with cable ties.
4. Insert the printed plastic fitting for the pipe into the bottom part.
5. Solder the wires to the Power Supply Jack Socket. I recommend using 2-pin detachable connectors for easy disassembly.
6. Solder the wi