AMD Pro V540 Cooler

This cooler was designed specifically for the unreleased AMD Pro V540. It may work with other GPUs as well. This design for the v540 respects the intended airflow direction and allows for even cooling of the dual GPUs.

I went back to a tube axial fan so that we can still mount the fan on the rear of the GPU but get the right airflow direction. It is spec'ed to work with motherboard headers to simplify running the fans. The temps are okay with this cooler. Nothing is going to overheat but you will be running than fan at 100% if you get it under 100% load. If you are not heavily loading the GPU you can get away with much lower percentages. This is the largest fan I can fit if the GPUs are to be able to fit side by side on a standard motherboard.

Sadly, this design also requires some additional hardware meaning you will need 2 M3x35mm screws. These can be sourced from McMaster Carr, Amazon, or your local hardware store most likely. As for interfacing with a motherboard you will need to