American Eagle Flag - Hueforge (V2)

Given the popularity of my original upload, I wanted to make an updated one based on the original. Hope you like it Original: https://makerworld.com/en/models/688358-america-flag-eagle-hueforge#profileId-617064 Project: America-Eagle-Flag.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.6mmFilaments Used: #181718 PLA Overture Matte Black Transmission Distance: 0.1 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (1.28mm) swap to Marine Blue At layer #14 (1.76mm) swap to Scarlet RedBorder Only Colors from here until the end. At layer #17 (2.12mm) swap to Ivory White f