Slicer Discord
Ames window illusion/paradox – 3D printable model from MakerWorld MakerWorld
Puzzles

Ames window illusion/paradox

37 Downloads
21 Likes
11 Makes
Go to Model
Motorized Ames window. For some it looks like the window is spinning in fuller circles, and for most people it looks like it is doing half circles, and going the other way. If a 3d object is placed on the small end of the window then it looks like is is phasing through. To see it best stand five feet away with you eyes level with the window. Then close one eye, and focus on a end. Adding a clip on the end amplifies the effect.assembly.put the motor in the motor casing through the bottomget the bottom lid and four screws. put the lid over the bottom of the motor and align the holes, then screw in the bolts. don't over tighten.take the big gear, and put the rod sticking out of it into the big hole on the side of the motor mount. screw a nut onto the bottom of the big gear when it is in. put he small gear onto he motor shaft.put the window into the hole in the top of the big gear. as shownoptional. alighn the support holes with the two other holes on the mount. then put two bolts to s
Category
Puzzles
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection