Amiga 1200 MultiTools for the Modulator Space

Steps:
1. Choose Your Pin Layout:
o Select either the 2-pin or 3-pin layout for the "Amiga Modulator Mount."
o Both layouts will work for the adapters.
o An "old" variant is available without the extra thin base.
Optional: Use fine sandpaper or a heater to smooth the mount pins.
Recommendation: The "Amiga Modulator Mount 3 pin" is personally recommended, but all options should work.
2. Mounting the Modulator Mount:
o Attach the Amiga Modulator mount to your mainboard using tiny wood screws from below.
o This should be the final time you need to unmount the mainboard from the case.
Caution: Seek help from a specialist if needed.
3. Choose a Bracket Kit:
o Select from various bracket kits depending on your specific needs.
4. Print the Top Lock:
o Print the "Top Lock 2 pin" or "Top Lock 3 pin" based on your previous choice.
5. Assemble and Secure:
o Assemble all parts and snap the top lock into place.
Printing Tips:
• Depending on the brackets, you might need to experime