AMS 2 Pro Tilt Stand

A tilt stand for the AMS 2 Pro to allow easier access (or in my case because the lid hit my top shelf without the stand) that maintains the AMS shape with a gap in the bottom middle for airflow. The stand prints in 2 main pieces, 2 printed connectors, and 4 small optional TPU anti skid cylinders that can be glued on. I highly suggest using the TPU anti skid pieces or your choice of anti slip material for the bottom or it will slide around. The TPU prints work great once filament spools are loaded into the AMS. The stand maintains air intake as well as exhaust for the AMS 2 Pro. The bottom is open and the rear has a notch for exhaust out. I used PLA for the stand and have had no issues due to heat from drying filament. Adjust other filaments accordingly for shrinkage. Complete model uses roughly 375g of filament with the print profiles. There are 2 print profiles. The H series printers can print Left/Right side of the tilt stand on 1 plate. X/P/A1 users will need 2 plates to print the t