AMS Card Spool Adapter - Overture

Overture - Adapter Core Designed to only require one core adapter per spool. Only tested on Overture cores so far, but will likely work on all cardboard spool cores as they seem to all be very similar in size. Tapered base to make it easier to press-fit into a cardboard core. Fluted ridges to make a tight fit into the cardboard, without making it impossible to remove. Space made for a filament capture-tag so the spool-end of the filament can be held securely in place while transferring spools. Peel away one cardboard side off of the original spool (The side with the internal/central filament tag is probably best to do first). Be careful not to let the tag get loose or the spool will unravel. Place the spool on a sturdy surface with the peeled side facing up. The adapter has a slot to line up with the notch on the Bambu spools. Make sure slotted side of the adapter is facing up. Press fit the adapter into the spool, until the edge of the adapter is flush with cardboard core. Poke the fi