AMS for large and small spools

The project uses parts from the original AMS from BambuLab.

Shopping list:
- bearing 618/4 4x9x4 - 8 pieces,
- bearing MR137 7x13x4 - 8 pieces,
- threaded insert M4x8.1 - 30 pieces (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs),
- threaded insert M5x9.5 - 6 pieces (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m5-standard-50stk-pcs),
- smooth rods linear shaft 4mm
... also, some rubber roller, something to replace the front roller from the original AMS. Personally, I used something like a rubber fuel hose with a diameter of 11 mm and an outer hole diameter of 4 mm. It's important that your roller doesn't have an outer diameter greater than 11mm.


Important:
Unfortunately, some cables used with AMS will need to be extended by cutting the cable and soldering an extension, for example.