AMS Hub Retainers

Because I didn't buy a suitable 4-channel HUB, I used a cheap way to connect, because my HUB needs to be fixed, locked, so I designed this model, it may not be suitable for everyone, people who need it can try itThe original screw is a bit short, only 1 screw can be locked, if you need to buy a long screw, the other one needs to be lockedScrew specification: M3*6L-----------------------------------------------------2023/12/14Another similar model is linked below, the method is the samehttps://makerworld.com/zh/models/91987#profileId-983812023/11/30 Supplementary processing methods and picturesHere's how I did it: FYI, this is not the correct way to do it. Any resulting losses will be borne by you.Below I will share how I modified it. The tail of the 4-in-1-out HUB must be pulled out, and use coarse sandpaper #120 to reduce the size of the tail to below 4.3, not less than 4.0, in order to effectively insert the HUB. Note that the original taper is between 4.35-4.6, so there will