AMS RISER no supports - replacable LED channel

I love blemcheimers original design… But i wanted to add one some more features and improvements. This remix includes:Removable and easy to upgrade 10 mm LED channels (for future proofing) Led channels include slots for 2,5mm wide zip ties (to prevent LEDs from falling out of the channel) Lip in front of the LEDs Designed to be easy to print separately without supports Top “spike” holder for AMS (only tested on newer ams)Additional connectors near the top (for future build plate holder add-on)Minimal tolerance friction fit connectors (may need lots of force to insert)Space for screws protruding from the glass top Printed in PLA. Required a total of 22h to print with approximately 821g (275m) of filament being used. I used blemcheimers print settings. To assemble i suggest you use lots of force to insert the connectors (i used a hex screwdriver to push down on the connectors ) .I used 10mm LEDs but i suppose you could use wider ones, you will need approximately 1.5m. From my experience