AMS-SDS 2 Pro Remix

Reworked Sepp89117 AMS-SDS 2 Pro Spool Jump & Slip Fix to work with the cardboard spools I am using. Created removal tool for the Holder. Reworked Holder to remove rear flange for ease of assemble. Reworked lever by lowering the roller mounting 10mm, Added stop to limit downward travel, Added retaining screw for roller inner race (Tap hole M3 part way, then use M3x12mm countersunk screw), and Made the thumb lever into an indicator for when the roller is perpendicular in the spool (All indicators straight up, even with different size rollers, means they all have the same downward pressure and perpendicular rollers). Added additional 1.5mm hole in lever for less spring tension (Need to cut the spring leg), approx 60% tension when spring is in the hole. (see picture, lever on the left has 60% tension). I had one spool that was reporting AMS motor overload, dropping the spring tension appears to have helped some. My opinion is that the increased downward pressure increases friction at two