AN Vise Jaws

These are vise jaws for making AN hoses without scratching the fittings. I printed these with 5 walls, 5 top and bottom layers, and 25% infill. Most of the strength of these is going to come from the top and bottom layers. These are made to hold 15mm magnets, will link the pack I used below. I was able to hold the magnets in without using any glue. Will update once I have used these more.

Magnets : https://a.co/d/8OkDUS3


Update: These work great for rubber AN hose ends but struggle a bit with PTFE AN hose ends. Definitely will work great if you need to make fuel lines for your car but they will wear out fairly quickly