Android 18 Dragonball Hueforge

Project: Android18.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 108.43x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.2This print uses 6 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Cyan At layer #15 (1.28mm) swap to Jade White At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to Indigo Purple At layer #18 (1.52mm) swap to Red At layer #21 (1.76mm) swap to Jade White At layer #22 (1.84mm) swap to Red At