Android 18

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 100.88x180mm in size  You may print at higher layer heights below the Min Depth of 0.72mm  The Max Depth is 2.7mm and the Actual Depth is 2.5mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Red Transmission Distance: 1.5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to White At layer #21 (1.76mm) swap to Red for the rest.