Anet A8 Direct Feed E3D Carriage Mount

This product & many more can be brought via our website at www.cobratronic.com

**Anet Direct Feed E3D Carriage Mount**

Motor mounted 90 degrees offset on X axis which gives easy front access to filament feeder
Motor weight centrally mounted directly above bearings
Heatsink fan mounted behind cooling fins to give improved vision
Side mounted Hotend fan to give improved hotend vision
Additional mounting points for bed sensor brackets
Mounting points for Black Semi Enclosed Drag Chain Carrier 10mm x 10mm.
Tidy Cable direction management

Before you ask yes built in PLA. Print PETG and ABS with no problem. If this mount gets that hot then you need to switch on your heat sink fan as the mounting area should always be cold unless you like blocked filament feed cold areas

Built for use with additional parts

E3D clone hotend
https://www.amazon.co.uk/Finlon-Hotend-Extruder-Printer-Filament/dp/B0734MR3JR/ref=sr_1_1?rps=1&ie=UTF8&qid=1508671763&sr=8-1&keywords=e3d+v6&refineme