Anet A8 Plus Cable Chain Optimised

This is a completely new design, optimising the cable chain concept. All bracketry is new and applicable to the Anet A8 Plus.

Features Include:

1. Lightened and miniaturised chain links, 1.4g vs 2.4g for the old style commonly found.

2. Cable installation on the fly - cut out channel on links and brackets for easy installation without removal of plugs or connectors.

3. Use minimal amount of fixture and use clips where possible.

4. No support or raft needed.

5. Futureproof for addition of Z-axis chain.

6. Integrated cable tie slots in some components (where necessary.)

7. Underside Y axis cable routing meaning no rear moving chain behind the machine.

You will require 35 links for the X-Chain and 22 for the Y (+/-1 link). You will need to print 2 of the 0013 Linkage B parts.

Print all parts 0.2mm layer height. If you have a good fan duct use 15-40% Fan. If you have a rubbish fan duct use 60=80% fan speed. There are angled overhangs and the round holes in the