Anet A8 Profile

*Configurare Cura per Anet A8*
========================

Impostazioni--> Stampante--> Aggiungi stampante in Other scegliete Prusa i3 e impostate tutto come nella foto



####**Start Code**
------------

>G21 ;metric values
>G90 ;absolute positioning
>M82 ;set extruder to absolute mode
>M107 ;start with the fan off
>G28 X0 Y0 ;move X/Y to min endstops
>G28 Z0 ;move Z to min endstops
>G1 Z15.0 F9000 ;move the platform down 15mm
>G92 E0 ;zero the extruded length
>G1 F200 E3 ;extrude 3mm of feed stock
>G92 E0 ;zero the extruded length again
>G1 F9000
>M117 Stampa...


####**Stop Code**
-----------
>M104 S0 ;extruder heater off
>M140 S0 ;heated bed heater off (if you have it)
>G91 ;relative positioning
>G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
>G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit an