Thingiverse
ANET AM8 2525 V2
von workale
46
Downloads
43
Likes
0
Makes
The frame is realized with square tubulars steel 25x25.
The tubulars must be cut with the dimensions that you can find on the drawing, that is:
2 pieces 362mm
2 pieces 323mm
1 piece 373mm
2 pieces 397mm
the tubes are welded together with the dimensions found in the drawing.
All the plastic parts are made of PETG, a very good material with good mechanical characteristics.
For the fixing I used self-tapping screws of Ø4 x12mm.
Link
E3Dv6 Bowden X-Carriage with Vslot
https://www.thingiverse.com/thing:3380902
BED Vslot stand
https://www.thingiverse.com/thing:3367721
Revision:
04/11/2018 Added photos.
05/11/2018 Added Power supply stand.
07/11/2018 Added new photos and new stand display (new_stand_display.stl)
09/11/2018
1) Update stand Display to REV02
2) Update drawing
3) Added V2 option for display mounting (stl V2 as show to picture ISO_V2)
4) Added X Tensioner
Update 03/08/2021
Added Z syncro
Added stand display.
The tubulars must be cut with the dimensions that you can find on the drawing, that is:
2 pieces 362mm
2 pieces 323mm
1 piece 373mm
2 pieces 397mm
the tubes are welded together with the dimensions found in the drawing.
All the plastic parts are made of PETG, a very good material with good mechanical characteristics.
For the fixing I used self-tapping screws of Ø4 x12mm.
Link
E3Dv6 Bowden X-Carriage with Vslot
https://www.thingiverse.com/thing:3380902
BED Vslot stand
https://www.thingiverse.com/thing:3367721
Revision:
04/11/2018 Added photos.
05/11/2018 Added Power supply stand.
07/11/2018 Added new photos and new stand display (new_stand_display.stl)
09/11/2018
1) Update stand Display to REV02
2) Update drawing
3) Added V2 option for display mounting (stl V2 as show to picture ISO_V2)
4) Added X Tensioner
Update 03/08/2021
Added Z syncro
Added stand display.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!