Anet AM8 Conversion PSU Cover

A while ago i build this Anet A8 to AM8 Conversion.

https://www.thingiverse.com/thing:2263216

One thing i missed is a working PSU Cover so i built my own.
This Cover is Flush with the Backside of the Printer.

You need:

4x T-Nut M3
8x M3x12 screw
4x Nut M3
2x Insert Nut M3x5
1x Power Plug with Fuse Holder


Assembly:

1. Insert the two insert nuts with an soldering iron set to medium temp at the backside
of the Power Plug mounting holes.
2. Mount the front to the backside using 4x m3x12 screws and 4x m4 Nuts
3. Mount the Cover to the Frame under the PSU Holder, letting the screws a bit loose
4. Align the PSU Holder, the PSU and the PSU Cover
5. Tighten all screws using the hole of the Power Plug
6. Mount the Power Plug