Anet e16 hot bed cable brace

More photos to come!

PLease read entire description before printing!

Had an issue with thermal runaway, thought it may be a bad connection of the plug on the hot bed so designed this. (turns out my thermister had a broken wire)

It is designed to "clip" onto the connection on the heated bed, then a 2.5mm wide cable tie/ wire tie around the plug located in the groove- to ensure the plug doesnt flex and can not move in and out effectivly creating a more rigid connection.

My printer has been modified, i use 2x "tap washers" instead of springs for bed level adjustment, this part is designed to sit under those. (8mm high from the hot bed mounting plate and the underside of the hot bed)

If you can let me know the height from the underside of the bed to the top of the platform ( the height of the spring that is leveling the bed on that corner)
i can modify the print to suit your printer :).

The end where the cable leaves the support brace, has one hole for a 2.5mm cable tie