Angel Dust

Project: angel dust 1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Hatchbox Purple Transmission Distance: 2.6PLA PolyLite Pro Grey Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to PurpleAt layer #14 (1.2mm) swap to GreyAt layer #19 (1.6mm) swap to Jade White for the rest.Found it stuck better at 70c