ANGEL HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to BambuLab Green At layer #15 (1.28mm) swap to Black At layer #22 (1.84mm) swap to Brown At layer #26 (2.16mm) swap to Silver At layer #30 (2.48mm) swap to White for the rest.