Angle Clamp V3 Fully 3D Printed

This is probably the best clamp I have designed so far, this angle clamp is fully 3D Printable no hardware, its easy to print, easy to assemble, the thread is Trapezoidal making it quicker to screw in/out, first time I have used this type of thread and it works a treat.Assembly is a breeze with only 5 Components.To assemble: Screw the thread into the main body of the clamp approx half way, align the triangle shaped clamp with the screw and slide onto the thread, secure the thread via the slot with the removable thread retaining clip, turn the clamp upside down and align and insert the guide block, this only fits one way, use a ittle CA Glue or similar for a more permanent solution, and that is it, the clamp can be secured to a surface with the 4 countersunk holes.The clamp has a working area of 40mm between the jaws.I have scaled this clamp down to 80% from original as well so we know it scales.Note:I always print a prototype and then make any necessary adjustments before printing the