Angle / Corner Clamp woodworking

Hardware: 4 x M10 nuts (self locking) 1 x M10 Washer 1 x threaded rod M10 - 200mm lenght Threadlocker Settings: 0.20mm Standard +custom settings: Wall loops: min. 5 Outer wall: 25 mm/s Infill 30 % supports are not necessary ABS / PETG Base Part Add a pause in Slicer at 36mm height - that you can insert an M10 nut with 17mm wrench size. Handle Add a pause in Slicer at 18,2mm height - that you can insert an M10 nut with 17mm wrench size Assembling: As a reminder, if you use threadlocker instead of self-locking nuts, you must let it dry first before use. Step 1 Turn the threaded rod into the main part. Then put an M10 nut and a washer on it. Step 2 Put the clamp part on it and then the second nut, fix the outer nut with threadedlocker or a self locking nut so that the nut and the rod are flush (green line). <img src="https://media.printables.com/media/prints/45