Angle grinder tool

Have you lost your key to the angle grinder and need a new one?
For a Steelo 125 mm angle grinder, the standard size of the key is 30 mm C/C (the distance between the centers of the holes).
The pins on the key usually have a diameter of 4 mm.

If you do not have 25mm screw you can also use longer but do not screw to the bottom because then the spikes will be too long. should only stick out 7mm.

Printed flat and does not need support.

Need: screw m4x25mm 4 pieces.

Wall 4
Infill 15%