Angle Measuring Tool with Ruler

After seeing ThatSlacker's laser-cut ruler addition, I decided to do the same, but w/ 3D printing. You can use any two colors you like, but the best results I had was a dark base and swap a brighter/lighter color for the final layers.

See notes below if you've never done a color swap before. I'll also add links to the hardware I personally used in case you're unsure what type. It doesn't really matter though, as long as the bolts are long enough to go through the arms and tighten down with the fastener. I prefer torque tops with black finish, but that's purely personal preference.

Hardware Needed for Normal Version::
4 - [M4 x 15mm bolts](https://www.amazon.com/Bolt-Base-Tensile-Socket-screws/dp/B00SN32OH8/)
4 - [M4 nuts](https://www.amazon.com/Stainless-Finish-Metric-M4-0-7-Thread/dp/B009EFQGMS/)

Hardware Needed for Inlay Version
4 - M4 x 12mm bolts
4 - M4 nuts

Note;
The whole thing was rigid after the first assembly. The bolts didn't slide very well, and I was pret