Angry Dragon hueforge

Dragon con mirada intensa.se puede modificar X Y pero no ZProject: draon azul.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 114.22x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #17 (1.44mm) swap to Jade White At layer #18 (1.52mm) swap to Marine BlueBorder Only Colors from here until the end. At layer #27 (2.24mm) swap to White for the rest.Boost Me