Animal Crossing Style Display Risers

I made this little riser set to help display my Animal Crossing sets on the shelf. It really is only 2 different risers, but I just needed 2 of the one to make it all the way across the shelf. Material:I used the OVERTURE Matte Light Brown PLA for the main cliffs body. I used eSUN Green PLA Basic for the grass. I had few curling problems on the corners of the grass sections. I ended up using some PVA glue to make sure the corners of the plates didn't curl while cooling. I think if I would have gone in and slowed down the print that would have worked too, but a warm water and a rag was all it took to clean off the PVA glue residue from both the part and the print plate, so it wasn't worth slowing it down in my opinion. I used the ELEGOO PLA Filament in Sky Blue for the waterfall. I have found that it is almost an exact color match to the water elements from the Animal Crossing sets